wiki:NewLiveServer

Version 36 (modified by chris, 6 years ago) (diff)

--

quince.webarch.net

This is a debian Xen virtual server with 1GB ram, 32GB HDD, single partition, 4 processors and one IP address, 81.95.52.88.

Munin starts for the server are available on the webarchitects monitoring server and on the transition network development server.

The live site is being set up at http://live.quince.webarch.net/ and the notes about the old live server are here: LiveServer The move to quince.webarch.net is being sorted out on ticket:147

apache

The server is running the default debian apache2:

/usr/sbin/apache2 -v
  Server version: Apache/2.2.9 (Debian)
  Server built:   Apr 20 2010 15:40:17
/usr/sbin/apache2 -l 
  Compiled in modules:
    core.c
    mod_log_config.c
    mod_logio.c
    prefork.c
    http_core.c
    mod_so.c

The main configuration file is /etc/apache2/apache2.conf and the virtual hosts are sym linked from /etc/apache2/sites-enabled

apc

The php-apc package is installed and info about how it is preforming is at https://live.quince.webarch.net/info/apc.php

The #mediawiki site is set to use APC via this setting in /web/wiki.transitionnetwork.org/www/LocalSettings.php

$wgMainCacheType = CACHE_ACCEL;

Drupal can be set to use it via /web/transitionnetwork.org/www/sites/default/settings.php

mediawiki

The Mediawiki site at http://wiki.transitionnetwork.org/ will be running running on quince.webarch.net after the server switch, ticket:147, it is also available at http://wiki.quince.webarch.net/

There is also a wiki:DevelopmentServer#Mediawiki version of this site at http://wiki.dev.transitionnetwork.org/ -- when upgrading Mediawiki please first test the upgrade on the dev server first.

Mediawiki is installed in /web/wiki.transitionnetwork.org/www and the apache VirtualHost configuration is in /etc/apache2/sites-available/wiki.transitionnetwork.org.conf.

To upgrade the site to the latest version of Mediawiki, from http://www.mediawiki.org/wiki/Download you could follow the instructions from http://www.mediawiki.org/wiki/Upgrade or use the mediawiki-upgrade script which takes the latest version of Mediawiki as an argument on the command line and then does everything for you:

kiwi:~# mediawiki-upgrade 1.16.0

The main configuration file for Mediawiki is /web/wiki.transitionnetwork.org/www/LocalSettings.php and this are the things that have been changed from their default values:

$wgScript           = "/index.php";
$wgRedirectScript   = "/redirect.php";
$wgArticlePath      = "/$1";

$wgLogo             = "/images/wiki.png";

$wgEmergencyContact = "wiki@transitionnetwork.org";
$wgPasswordSender = "wiki@transitionnetwork.org";

$wgRightsPage = "Copyright"; # Set to the title of a wiki page that describes your license/copyright
$wgRightsUrl = "http://creativecommons.org/licenses/by-sa/2.0/uk/";
$wgRightsText = "Creative Commons Attribution-Share Alike 2.0 UK: England & Wales";
$wgRightsIcon = "/images/cc-by-sa.png";

backup2kiwi

To backup the Mysql database and the files for the web sites to the wiki:DevelopmentServer run the /usr/local/bin/backup2kiwi script, it puts the files in /home/live/quince on kiwi.webarch.net and these files are used by the scripts on kiwi to update the Drupal and Mediwiki sites with the latest data from the live sites.

mysql-backup

A MySQL Backup script from http://worldcommunitypress.com/opensource/mysql-backup is installed in /usr/local/bin and it's set to create backups in /var/backups/mysql/

It needed the libmime-lite-perl debian package to be installed.

To run it:

/usr/local/bin/mysql-backup

These lines have been changed from the original at http://worldcommunitypress.com/assets/files/opensource/utilities/mysql_backup.txt :

$admin_email_to              = 'chris@webarchitects.co.uk';
$admin_email_from            = 'root@quince.webarch.net';
$cnf_file                    = '/root/.my.cnf';
$site_name                   = 'quince.webarch.net';
$mysql_backup_dir            = '/var/backups/mysql';

backupninja

Backupninja has been installed and set up -- it's set to backup files to another server in the same rack and then this backups up the data to a server in another colo. The main configuration file is /etc/backupninja.conf and the files containing the list of things to be backed up are in /etc/backup.d/. 60 days worth of backups are saved. It is set to backup MySQL and the following directories:

include = /var/spool/cron/crontabs
include = /var/backups
include = /etc
include = /root
include = /home
include = /usr/local/*bin
include = /var/lib/dpkg/status*
include = /web
exclude = /home/*/.gnupg
exclude = /home/*/.local/share/Trash
exclude = /home/*/.Trash
exclude = /home/*/.thumbnails
exclude = /home/*/.beagle
exclude = /home/*/.aMule
exclude = /home/*/gtk-gnutella-downloads

php

See https://live.quince.webarch.net/info/ for the php info, the php.ini file is /etc/php5/apache2/php.ini

PECL Uploadprogress was installed as suggested here: http://www.joergfelser.at/content/howto-install-pecl-uploadprogress-debian-50-lenny

aptitude install php5-dev
pecl install uploadprogress

And this was added to the php.ini file:

extension=uploadprogress.so

The, default php.ini files which had these changes:

expose_php = Off
memory_limit = 256M
extension=uploadprogress.so

Was moved to php.ini.dist.tweaked and then /usr/share/doc/php5-common/examples/php.ini-recommended was copied to /etc/php5/apache2/php.ini and a new /etc/php5/apache2/conf.d/uploadprogress.ini file was created with this in it:

extension=uploadprogress.so

And /etc/php5/apache2/php.ini was edited and these things were changed:

expose_php = Off
memory_limit = 256M      ; Maximum amount of memory a script may consume (128MB)
error_log = syslog
post_max_size = 12M
upload_max_filesize = 12M
display_errors = On
default_charset = "utf-8"
mysql.default_socket = /var/run/mysqld/mysqld.sock
mysql.default_port = 3306
session.save_path = "N;/var/lib/php5"

phpmyadmin

This is available here: https://live.quince.webarch.net/phpmyadmin/ it's protected using htauthentication because there are a lot of attacks launched against phpmyadmin, ask chris@… for the username / password if you need it.

memcache

The memcache configuration file is /etc/memcached.conf the settings which have been changed from the default are:

# Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
# Note that the daemon will grow to this size, but does not start out holding this much
# memory
-m 128

The use of memcache by Drupal is configured in /web/transitionnetwork.org/www/sites/default/settings.php:

$conf['cache_inc'] = './sites/all/modules/cacherouter/cacherouter.inc';
$conf['cacherouter'] = array(
        'default' => array(
        'engine'  => 'memcache',
        'server'  => array('127.0.0.1:11211'),
        'shared'  => TRUE,
),
);

It's not clear if there is any gain from using memcache with one server, see this thread: http://groups.drupal.org/node/73513

munin

In addition to the plugins available by default these were installed:

TODO

  1. Sort out drupal errors:
warning: array_merge() [function.array-merge]: Argument #2 is not an array in /web/transitionnetwork.org/www/includes/theme.inc on line 930.
warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'nodereference_autocomplete_access' was given in /web/transitionnetwork.org/www/includes/menu.inc on line 452.
  1. Optimise, what php accelerator should we use? Tweak MySQL defaults.
  1. Cron
  1. Consider switching to http://www.dotdeb.org/ packages for php and mysql -- this should solve the GD problem...

Setup Notes

Live site, directory and svn checkup:

mkdir -p /web/transitionnetwork.org/
cd /web/transitionnetwork.org/
svn co https://svn.webarch.net/transition/code/trunk
mv trunk www
cd /web/transitionnetwork.org/www/sites
mkdir cache
chown www-data:www-data cache
mkdir workspaces.transitionnetwork.org
rsync -av kiwi:/home/live/new-live-data/web/transitionnetwork.org/www/sites/workspaces.transitionnetwork.org/ workspaces.transitionnetwork.org/
chown -R www-data:www-data workspaces.transitionnetwork.org/files/
cd /web/transitionnetwork.org/www/sites/default
rsync -av kiwi:/home/live/new-live-data/web/transitionnetwork.org/www/sites/default/files/ files/
chown -R www-data:www-data files

Databases were imported using a script, /usr/local/bin/mysql-update-from-gaia the two settings.php files were edited to suite.

There was a problem with missing modules:

Warning: require_once(./sites/all/modules/cacherouter/cacherouter.inc) [function.require-once]: failed to open stream: No such file or directory in /web/transitionnetwork.org/www/includes/bootstrap.inc on line 1009

Fatal error: require_once() [function.require]: Failed opening required './sites/all/modules/cacherouter/cacherouter.inc' (include_path='.:/usr/share/php:/usr/share/pear') in /web/transitionnetwork.org/www/includes/bootstrap.inc on line 1009

This modules isn't in svn any more: https://svn.webarch.net/transition/code/trunk/sites/all/modules/cacherouter

So it was copied over manually:

mkdir /web/transitionnetwork.org/www/sites/all/modules/cacherouter/
rsync -av kiwi:/home/live/new-live-data/web/transitionnetwork.org/www/sites/all/modules/cacherouter/ /web/transitionnetwork.org/www/sites/all/modules/cacherouter/

The following Drupal errors:

# warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'ctools_export_ui_task_access' was given in /web/transitionnetwork.org/www/includes/menu.inc on line 452.
# warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'ctools_access_multiperm' was given in /web/transitionnetwork.org/www/includes/menu.inc on line 452.
# warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'ctools_export_ui_task_access' was given in /web/transitionnetwork.org/www/includes/menu.inc on line 452.
# warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'ctools_export_ui_task_access' was given in /web/transitionnetwork.org/www/includes/menu.inc on line 452.
# warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'views_import_access' was given in /web/transitionnetwork.org/www/includes/menu.inc on line 452.
# warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'nodereference_autocomplete_access' was given in /web/transitionnetwork.org/www/includes/menu.inc on line 452.

Were fixed by clearing the cache, using this page: https://live.quince.webarch.net/admin/settings/performance

Attachments